Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 30128
General information
Code: | FE180331 |
Brand: | FEBI BILSTEIN |
Title: | Fuel Filter |
Car: | NISSAN |
Weight : | 0,43 kg |
Criteria
Filter type: | In-Line Filter |
Filter type: | with connection for water sensor |
Filter type: | with water drain screw |
Height [mm]: | 128 mm |
Outer Diameter [mm]: | 99 mm |
Pipe Ø [mm]: | 10 mm |
Pipe Ø [mm]: | 8 mm |
Weight [kg]: | 0,434 kg |
Supplementary Article/Supplementary Info: | with valve |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE184428 |
Brand: | FEBI BILSTEIN |
Title: | Fuel Filter |
Car: | NISSAN |
Weight : | 0,43 kg |
Criteria
Filter type: | In-Line Filter |
Filter type: | with connection for water sensor |
Filter type: | with water drain screw |
Height [mm]: | 127,5 mm |
Outer Diameter [mm]: | 103 mm |
Pipe Ø [mm]: | 8 mm |
Weight [kg]: | 0,43 kg |
Supplementary Article/Info 2: | with seal ring |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE30128 |
Brand: | FEBI BILSTEIN |
Title: | Belt Tensioner, V-ribbed belt |
Car: | VOLVO |
Weight : | 0,88 kg |
Criteria
Width of castor bearing surface [mm]: | 25,5 mm |
Housing material: | Aluminium |
Track rollers material: | Plastic |
Outer Diameter [mm]: | 65 mm |
Operating Mode: | Automatic |
Weight [kg]: | 0,875 kg |
Observe service information: | yes |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | HOF8290127 |
Brand: | HOFFER |
Title: | Sensor, wheel speed |
Car: | FORD |
Weight : | 0,10 kg |
Criteria
Number of pins: | 2 -pin connector |
Connector Shape: | D Shape |
Socket colour: | white |
Cable Length [mm]: | 750 mm |
Overall Length [mm]: | 850 mm |
Number of mounting bores: | 1 |
Sensor Type: | Inductive Sensor |
Resistor [kOhm]: | 1,1 kOhm |
Fitting Depth [mm]: | 15 mm |
For OE number: | 97KG 2B372 AA |
Fitting Position: | Front Axle Right |
Fitting Position: | Front Axle Left |
Show all
Show less
General information
Code: | RNK-CT-013 |
Brand: | NTY |
Title: | Tensioner Pulley, V-ribbed belt |
Car: | CITROEN C5 II, C5 III, C6, C8, C-CROSSER, FIAT ULYSSE, FORD GALAXY, MONDEO IV, S-MAX, LANCIA PHEDRA, LAND ROVER FREELANDER 2, PEUGEOT 4007, 407 2.0D/2.2D 03.06- |
Weight : | 0,12 kg |
Criteria
Diameter [mm]: | 65 mm |
Width [mm]: | 25,5 mm |
Tensioner Pulley Actuation: | Automatic |
Fabrication Number: | RNK-CT-013 |
Show all
Show less
General information
Code: | RNK-CT-044 |
Brand: | NTY |
Title: | Tensioner Pulley, V-belt |
Car: | CITROEN C5 II, C5 III, C6, C8, FIAT ULYSSE, LANCIA PHEDRA, LAND ROVER RANGE ROVER EVOQUE, PEUGEOT 407, 508, 508 I, 607, 807 2.2D 06.02- |
Weight : | 0,12 kg |
Criteria
Width [mm]: | 25,5 mm |
Outer Diameter [mm]: | 60 mm |
Inner Diameter [mm]: | 17 mm |
Fabrication Number: | RNK-CT-044 |
Show all
Show less