Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 29-0034
General information
| Code: | 351968070000 |
| Brand: | MAGNETI MARELLI |
| Title: | Shock Absorber |
| Car: | FIAT |
| Weight : | 2,49 kg |
Criteria
| Fitting Position: | Rear Axle |
| Shock Absorber Design: | Damper Module |
| Shock Absorber Mounting Type: | Bottom eye |
| Shock Absorber Mounting Type: | Top eye |
| Shock Absorber Type: | Gas Pressure |
| Shock Absorber System: | Twin-Tube |
| Spring Type: | for vehicles with coil spring suspension |
Show all
Show less
General information
| Code: | FE176589 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump & Timing Belt Kit |
| Car: | ŠKODA-VW |
| Weight : | 1,87 kg |
Criteria
| Width [mm]: | 30 mm |
| Water pump impeller material: | Metal |
| Seal Material: | Rubber |
| Number of Teeth: | 120 |
| Belts: | with rounded tooth profile |
| Weight [kg]: | 1,87 kg |
| Supplementary Article/Supplementary Info: | with water pump |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE17761 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt |
| Car: | PEUGEOT |
| Weight : | 0,30 kg |
Criteria
| Width [mm]: | 25,4 mm |
| Number of Teeth: | 140 |
| Belts: | with trapezoidal tooth profile |
| Weight [kg]: | 0,3 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE17765 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt |
| Car: | PEUGEOT |
| Weight : | 0,18 kg |
Criteria
| Width [mm]: | 25,4 mm |
| Number of Teeth: | 141 |
| Belts: | with rounded tooth profile |
| Weight [kg]: | 0,18 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE19540 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt |
| Car: | ŠKODA-VW |
| Weight : | 0,18 kg |
Criteria
| Width [mm]: | 30 mm |
| Material: | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth: | 120 |
| Surface: | PTFE (Polytetrafluorethylene) coated |
| Belts: | with rounded tooth profile |
| Weight [kg]: | 0,18 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE19623 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt Kit |
| Car: | PEUGEOT |
| Weight : | 1,11 kg |
Criteria
| Width [mm]: | 25,4 mm |
| Number of Teeth: | 141 |
| Belts: | with rounded tooth profile |
| Weight [kg]: | 1,11 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE21706 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | ŠKODA-VW |
| Weight : | 0,69 kg |
Criteria
| Width [mm]: | 31,5 mm |
| Width [mm]: | 36 mm |
| Outer Diameter [mm]: | 68 mm |
| Weight [kg]: | 0,692 kg |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE21708 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection Pulley/Guide Pulley, timing belt |
| Car: | ŠKODA-VW |
| Weight : | 0,23 kg |
Criteria
| Width [mm]: | 35 mm |
| Inner Diameter [mm]: | 37 mm |
| Outer Diameter [mm]: | 40 mm |
| Material: | Metal |
| Weight [kg]: | 0,229 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE21724 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt Kit |
| Car: | ŠKODA-VW |
| Weight : | 1,10 kg |
Criteria
| Width [mm]: | 30 mm |
| Number of Teeth: | 120 |
| Surface: | Coated |
| Belts: | with rounded tooth profile |
| Weight [kg]: | 1,100 kg |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE21726 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt Kit |
| Car: | ŠKODA-VW |
| Weight : | 1,10 kg |
Criteria
| Width [mm]: | 30 mm |
| Number of Teeth: | 120 |
| Surface: | Coated |
| Weight [kg]: | 1,1 kg |
| Supplementary Article/Info 2: | with tensioner element |
| Units/Pulleys: | incl. hydraulic belt tensioner |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less