Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 27295
General information
| Code: | EGR-AU-011 |
| Brand: | NTY |
| Title: | EGR Valve |
| Car: | AUDI A3 2.0FSI 2003-, SEAT TOLEDO 2.0FSI 2004-, SKODA OCTAVIA 2.0FSI 2004-, VW GOLF 2.0FSI 2004- |
| Weight : | 1,63 kg |
Criteria
| Supplementary Article/Supplementary Info: | without EGR cooler |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Operating Mode: | Electric |
| Number of pins: | 5 -pin connector |
| Fabrication Number: | EGR-AU-011 |
Show all
Show less
General information
| Code: | ESL-MS-010 |
| Brand: | NTY |
| Title: | Lambda Sensor |
| Car: | MITSUBISHI LANCER CS1A 1.3,CS3A/3W 1.6 2003-/REGULATORY/ |
| Weight : | 0,14 kg |
Criteria
| Fitting Position: | Front |
| Lambda Sensor: | Diagnostic Probe |
| Lambda Sensor: | Thread pre-greased |
| Fitting Position: | after catalytic converter |
| Fabrication Number: | ESL-MS-010 |
Show all
Show less
General information
| Code: | FE175876 |
| Brand: | FEBI BILSTEIN |
| Title: | Lambda Sensor |
| Car: | MITSUBISHI |
| Weight : | 0,09 kg |
Criteria
| Lambda Sensor: | Heated |
| Lambda Sensor: | Regulating Probe |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of circuits: | 4 |
| Cable Length [mm]: | 400 mm |
| Weight [kg]: | 0,089 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177488 |
| Brand: | FEBI BILSTEIN |
| Title: | Lambda Sensor |
| Car: | CHRYSLER |
| Weight : | 0,10 kg |
Criteria
| Lambda Sensor: | Heated |
| Lambda Sensor: | Regulating Probe |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of circuits: | 4 |
| Cable Length [mm]: | 500 mm |
| Weight [kg]: | 0,099 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE19010 |
| Brand: | FEBI BILSTEIN |
| Title: | Flange, carburettor |
| Car: | FIAT |
| Weight : | 0,25 kg |
Criteria
| Weight [kg]: | 0,25 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE27295 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt Kit |
| Car: | OPEL |
| Weight : | 2,15 kg |
Criteria
| Width [mm]: | 30 mm |
| Number of Teeth: | 225 |
| Belts: | with rounded tooth profile |
| Weight [kg]: | 2,146 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | HOFH27295 |
| Brand: | HOFFER |
| Title: | Wiper Motor |
| Car: | CHEVROLET |
| Weight : | 1,39 kg |
Criteria
| Fitting Position: | Front |
| Voltage [V]: | 12 V |
| For OE number: | 96540501 |
Show all
Show less