Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 21541
General information
| Code: | 302015100015 |
| Brand: | MAGNETI MARELLI |
| Title: | Joint Kit, drive shaft |
| Car: | AUDI |
| Weight : | 2,65 kg |
Criteria
| Length [mm]: | 66 mm |
| External Toothing wheel side: | 36 |
| External Toothing differential side: | 27 |
| Seal Diameter [mm]: | 59,5 mm |
| Specification: | BELL PIN LENGTH - 40 |
Show all
Show less
General information
| Code: | 350982022000 |
| Brand: | MAGNETI MARELLI |
| Title: | Water Pump, engine cooling |
| Car: | TOYOTA |
| Weight : | 2,05 kg |
General information
| Code: | CPW-TY-006 |
| Brand: | NTY |
| Title: | Water Pump, engine cooling |
| Car: | TOYOTA AVENSIS 2.0D-4D 99-03, COROLLA 2.0TDI 00-03, RAV-4 2.0TDI 01- |
| Weight : | 2,05 kg |
Criteria
| Operating Mode: | Mechanical |
| Supplementary Article/Supplementary Info: | with seal |
| Fabrication Number: | CPW-TY-006 |
Show all
Show less
General information
| Code: | CR351000S |
| Brand: | MAHLE |
| Title: | Radiator, engine cooling |
| Car: | FIAT |
| Weight : | 3,40 kg |
Criteria
| Radiator type: | Mechanically jointed cooling fins |
| Core Length [mm]: | 435 mm |
| Core Width [mm]: | 322 mm |
| Core Depth [mm]: | 34 mm |
| Water Tank Material (radiator): | Plastic |
| Supplementary Article/Info 2: | with screw |
| Vehicle Equipment: | for vehicles without air conditioning |
| Transmission Type: | Manual Transmission |
| Packaging height [cm]: | 17,00 cm |
| Net Weight [g]: | 2380 g |
| Packaging width [cm]: | 54,50 cm |
| Packaging length [cm]: | 70,5 cm |
| General Information: | SIMPLE FIT - Installation accessories, such as O-rings, seals, screws, nuts, bolts, and hose clips, are included with the product. VAUXHALL CORSAVAN Mk IV (E) Hatchback Van (X15) |
| General Information: | The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself. |
Show all
Show less
Netto price:
$75.00
($75.00 without VAT 0%)
Your price:
-30%
$52.50
($52.50 without VAT 0%)
| Warehouse: | 0 pcs | |
| Supplier: | Check |
General information
| Code: | FE30638 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | TOYOTA |
| Weight : | 1,83 kg |
Criteria
| Water pump impeller material: | Metal |
| Seal Material: | Paper |
| Material: | Cast Aluminium |
| Number of blades/vanes: | 6 |
| Weight [kg]: | 1,83 kg |
| For OE number: | 16100-29135 |
| Supplementary Article/Info 2: | with studs |
| Supplementary Article/Supplementary Info: | with seal |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE32729 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump & Timing Belt Kit |
| Car: | TOYOTA |
| Weight : | 2,83 kg |
Criteria
| Water pump impeller material: | Metal |
| Number of Teeth: | 178 |
| Belts: | with rounded tooth profile |
| Weight [kg]: | 2,83 kg |
| Belt Material: | HNBR (hydrogenated nitrile butadiene rubber) |
| Supplementary Article/Supplementary Info: | with water pump |
| For OE number: | 13568-29035 S2 |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE48986 |
| Brand: | FEBI BILSTEIN |
| Title: | Starter |
| Car: | RENAULT |
| Weight : | 19,00 kg |
Criteria
| Voltage [V]: | 24 V |
| Number of Teeth: | 12 |
| Rated Power [kW]: | 6,6 kW |
| Weight [kg]: | 19,00 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less