Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 10151
General information
| Code: | 20160220660 |
| Brand: | BF |
| Title: | Water Pump, engine cooling |
| Car: | ERF ECT MAN TGA/TGS/TGX/TGS D2066LF01→07 D2066LF11→72 D2066LF76→78 D2066LF80→86 D2066LF92→93 D2066LF* Euro 3/4/5/6 2004+ |
| Weight : | 4,20 kg |
Criteria
| Operating Mode: | Mechanical |
| Supplementary Article/Supplementary Info: | with seal |
| For OE number: | 51.06500-7049 |
Show all
Show less
General information
| Code: | FE03598 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | ŠKODA-VW |
| Weight : | 0,03 kg |
Criteria
| Thickness [mm]: | 10 mm |
| Inner Diameter [mm]: | 32 mm |
| Outer Diameter [mm]: | 47 mm |
| Material: | FPM (fluoride rubber) |
| Fitting Position: | frontal sided |
| Weight [kg]: | 0,03 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE102792 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | PEUGEOT |
| Weight : | 0,00 kg |
Criteria
| Thickness [mm]: | 2 mm |
| Inner Diameter [mm]: | 7,7 mm |
| Outer Diameter [mm]: | 15 mm |
| Material: | Copper |
| Weight [kg]: | 0,001 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE102802 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | PEUGEOT |
| Weight : | 0,00 kg |
Criteria
| Thickness [mm]: | 2 mm |
| Inner Diameter [mm]: | 7,7 mm |
| Outer Diameter [mm]: | 15 mm |
| Material: | Copper |
| Weight [kg]: | 0,001 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE102842 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | PEUGEOT |
| Weight : | 0,00 kg |
Criteria
| Thickness [mm]: | 2 mm |
| Inner Diameter [mm]: | 7,3 mm |
| Outer Diameter [mm]: | 16 mm |
| Material: | Copper |
| Weight [kg]: | 0,001 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE102852 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | PEUGEOT |
| Weight : | 0,00 kg |
Criteria
| Thickness [mm]: | 2 mm |
| Inner Diameter [mm]: | 7,3 mm |
| Outer Diameter [mm]: | 16 mm |
| Material: | Copper |
| Weight [kg]: | 0,001 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE28647 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | MAN |
| Weight : | 3,83 kg |
Criteria
| Water pump impeller material: | Grey Cast Iron |
| Seal Material: | Rubber/Metal |
| Material: | Aluminium |
| Number of blades/vanes: | 8 |
| Weight [kg]: | 3,83 kg |
| Supplementary Article/Supplementary Info: | with seal |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE46152 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | DAF |
| Weight : | 0,01 kg |
Criteria
| Thickness [mm]: | 2 mm |
| Inner Diameter [mm]: | 8 mm |
| Outer Diameter [mm]: | 15 mm |
| Weight [kg]: | 0,005 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | HOF25342 |
| Brand: | HOFFER |
| Title: | Repair Kit, cable set |
| Weight : | 0,04 kg |
Criteria
| Length [mm]: | 220 mm |
| Number of pins: | 2 -pin connector |