Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 0332070
General information
| Code: | BMO-VW-008 |
| Brand: | NTY |
| Title: | Oil Sump |
| Car: | VW GOLF V/VI 1.6 05-, CADDY III 1.6 04-, AUDI A3 1.6 04-, SKODA OCTAVIA 1.6 04-, SEAT ALTEA 1.6 04- /W/O HOLE FOR OIL SENSOR/ |
| Weight : | 2,52 kg |
Criteria
| Supplementary Article/Info 2: | without bore for oil level sensor |
| Fabrication Number: | BMO-VW-008 |
General information
| Code: | BMO-VW-025 |
| Brand: | NTY |
| Title: | Oil Sump |
| Car: | VW GOLF V/VI 1.6 05-, CADDY III 1.6 04-, AUDI A3 1.6 04-, SKODA OCTAVIA 1.6 04-, SEAT ALTEA 1.6 04- /WITH HOLE FOR OIL SENSOR/ |
| Weight : | 2,60 kg |
Criteria
| Length [mm]: | 433 mm |
| Width [mm]: | 274 mm |
| Height [mm]: | 126 mm |
| Section: | Lower Section |
| Supplementary Article/Supplementary Info: | with oil drain plug |
| Supplementary Article/Info 2: | with bore for oil-level sensor |
| See accessories list for additionally required parts: | yes |
| Fabrication Number: | BMO-VW-025 |
Show all
Show less
General information
| Code: | V10-1886 |
| Brand: | VAICO |
| Title: | Oil Sump |
| Car: | ŠKODA-VW |
| Weight : | 0,00 kg |
Criteria
| Section: | Lower Section |
| Length [mm]: | 433 mm |
| Oil Sump Material: | Aluminium |
| Height [mm]: | 126 mm |
| Observe the vehicle manufacturer specifications: | yes |
| Width [mm]: | 274,0 mm |
| Supplementary Article/Supplementary Info: | with oil drain plug |
| Supplementary Article/Info 2: | with seal ring |
| Supplementary Article/Info 2: | with bore for oil-level sensor |
| Supplementary Article/Info 2: | without oil sump gasket |
| See accessories list for additionally required parts: | yes |
| Observe system fill quantity: | yes |
| Weight [kg]: | 2,481 kg |
| General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Show all
Show less