|
Značka: MEC-DIESEL |
Kód: MEC190730 |
Název: Olejová vana
Olejová vana - MEC190730 MEC-DIESEL - 038103603AG, 9534475, 05966
Vozidlo: ŠKODA-VWBohužel, k tomuto produktu nemáme k dispozici žádný další popis.
Kategorie
Použito v
Žádné propojení na strukturu vozů a motorů není definováno.
Referenční čísla
- AUDI # 038103603AG
- MORRIS # 9534475
- Metalcaucho # 05966
- RHIAG # 10643989
- VEMA # 110024
- TOPRAN # 112 342
- FEBI BILSTEIN # 177587
- SWAG # 33104197
- MEC-DIESEL # 5138
- FAI AutoParts # PAN011
- STOP&GO # QD-VW-162
- BGA # SP9607
- RHIAG # 11143009
- RHIAG # 749228
- 038103603AG
- MEC-DIESEL # 190730
- V10-1884
- V101884
Alternativy
SU0020 - ET ENGINETEAM Olejová vana
Doporučujeme!Základní údaje
Kód: | V10-1884 |
Značka: | VAICO |
Název: | Olejová vana |
Doplňkový název: | Vana olejová 1,9TDI |
Vozidlo: | ŠKODA-VW |
Hmotnost : | 2,52 kg |
Vlastnosti
Šířka [mm]: | 280,0 mm |
Část: | spodní část |
Dbát zadání výrobce vozidla: | ano |
Délka [mm]: | 430 mm |
Montovaná strana: | Olejová vana |
Výška [mm]: | 125 mm |
Doplňkový výrobek/ doplňkové info: | se šroubem k vypuštění oleje |
Doplňující výrobek/info 2: | bez těsnění olejové vany |
Materiál olejové vany: | hliník |
Doplňující výrobek/info 2: | s těsnicím kroužkem |
Doplňující výrobek/info 2: | s vývrtem pro snímač stavu oleje |
Doplňkový potřebný díl - viz seznam příslušenství: | ano |
Dbát na objem náplně systému: | ano |
Hmotnost [kg]: | 2,181 kg |
Všeobecné informace: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
Všeobecné informace: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Zobrazit vše
Zobrazit méně