Tech-Info

Two piston versions for the 1.0 EcoBoost engine

The 1.0 EcoBoost engines are factory fitted with two piston versions. The first and second generation engines use different pistons.

Learn more

Tappet ZH0089VR1 with DLC surface for use in Pumpe Duse engines

The DLC surface gives the part a distinct advantage over the conventional design, both in surface hardness and lower coefficient of friction.

Learn more

HDEP (heavy duty engine platform) - ELRING gaskets for Mercedes-Benz

Since 2007, ELRING has been developing gaskets for its "heavy duty" platform - HDEP. Heavy duty trucks intended for work in demanding conditions and with the need to travel hundreds of thousands of kilometers require specific solutions and the use ...

Learn more

Pump 7.10101.00.0 with "SILGEL" is an improved version of pump 7.02671.48.0

Pump 7.10101.00.0 with "SILGEL" lasts longer. This is an improved version of pump 7.02671.48.0 with long service life. The service life of the pump is estimated at 7,000 operating hours.

Learn more

Dirko™ HT (red)

Dirko™ HT red (acetic curing) is a high-quality, high temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties.

Learn more

Dirko™ HT oxime (grey / beige / black)

Dirko™ HT oxime (neutral curing) is a highquality, high temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties.

Learn more

Causes and possible consequences of valve failures in the engine

Bent or broken valve does not always mean a fault in the valve itself. In the vast majority of cases, the cause lies elsewhere. See below for a list of 9 most common causes of valve problems.

Learn more

ELECTRICAL WATER PUMPS (CWA) COMPLETE AFTERMARKET OVERVIEW

Type CWA (Coolant Water Aggregate) electrical water pumps. Motorservice provides this top product in the aftermarket

Learn more

3 rules to correctly identify the right crankshaft for 2.3 JTD engines

There are three rules for the 2.3 liter engines found, for example, in the Iveco Daily or Fiat Ducato to help you identify the right crankshaft for your car.

Learn more

3 PUMPS × 4 DRIVE PULLEYS = 12 VARIANTS

Motorservice has put together a modular system for oil pumps – suitable for D08 engines from MAN. At Motorservice, you can simply select 1 of our 3 pump kits and combine this with one of the 4 possible drive gears. This is because BF brand pump ...

Learn more

Practical Piston Repair Set For 2.0 PD Engines

Pistons for BGW, BMM, BMP / 2.0 PD engines. Be careful during installation - one type of piston fits into the 1st and 2nd cylinder, the second version fits into the 3rd and 4th cylinder.

Learn more

Identifying the right camshaft for BLS engine

Which camshaft is the right one for PD engine code BLS

Learn more